Brass Safety Valve 1/2''-3/4''Inch for Heating System
Demensions
| DN(inch) |
DN1(inch) |
H(mm) |
H1(mm) |
H2(mm) |
L(mm) |
D(mm) |
| 1/2'' |
1/2'' |
71 |
23.5 |
9 |
28 |
31 |
| 1/2'' |
3/4'' |
73.5 |
26 |
9 |
30 |
31 |
| 3/4'' |
3/4'' |
73.5 |
26 |
9 |
30 |
31 |
Product Material
| NO. |
Parts |
Material |
| 1 |
Body |
Brass |
| 2 |
Spring |
SS |
| 3 |
Stem |
Brass |
| 4 |
Rubber Washer |
NBR |
| 5 |
O-ring |
NBR |
| 6 |
Bonnet |
PTFE |
Product Introduction
Brass safety valve for heating system is suitable for Installing at the Pressurized solar water heater, gas heater, electric water heater , water heater of fuel, heat pump water heater , sensitive function heater, etc. various kinds of heaters( such as the boiler) and hot water containers . The brass safety valve for heating system will be opened at the set temperature and pressure to protect the water tank. Brass safety valve for heating system should be installed on the top of the water heater top or side. The Temperature sensing element must be immersed in the water within the top 6″of the tank. The eliminating pipeline should be installed under the relief valve. Its terminal station distance in floor drain should be greater than 6″to make it easily remove and observe water.
Certificate
Production Line
Our Factory
About us
We are specialized in HAVC system parts and brass valve fields for more than 25 years, Our main products cover brass manifold, radiator valve, motorized valve, ball valve, gate valve,check valve, stop valve, safety valve, air vent valve, brass fitting and so on with more than 40 series and 2000 varieties.
Audited Supplier 
){kind=link}